Embperl FAQ - embed Perl code in your HTML docs
For basics on downloading, compiling, and installing, please see the INSTALL/``INSTALLATION'' in the Embperl documentation. Please be sure to load Embperl at server startup - if you do not, various problems may result. An exception to that rule is when you have compiled mod_perl with USE_DSO. In this case you must not load Embperl at server statup, neither via an use in your startup.pl file, nor via PerlModule from your httpd.conf.
No.
Win NT/95/98 binarys for Apache/perl/mod_perl/Embperl are available from ftp://theoryx5.uwinnipeg.ca/pub/other/ . A european mirror is at http://www.robert.cz/misc/ .
First mod_perl and Apache, then Embperl.
../apache_1.3.0/src/include/conf.h:916: regex.h: No such file or directory
Try compiling Embperl again, like this:
make DEFS=-DUSE_HSREGEX
cc: Internal compiler error: program cc1 got fatal signal 11 make: *** [epmain.o] Error 1
GCC croaking with signal 11 frequently indicates hardware problems. See http://www.bitwizard.nl/sig11/
Try recompiling Perl and all modules -- this can sometimes make those annoying error messages disappear!
For example, I don't allow CGI scripts, so 'make test' fails at CGI. How do I run just the other tests?
Try:
$ make test TESTARGS="--help" # and for just offline and mod_perl: $ make test TESTARGS="-hoe"
see ``I get symbol ap_* undefined/cannot resolve ap_*''
This can happen when symbols in the Apache binary can not be found or are not being resolved correctly.
Some OS do this (for instance bsdos), and it can also happen if your Apache binary is set to strip symbol information out from binaries.
Try:
If that works, it means that your installation of Embperl is OK, but is having problems resolving symbols with Apache.
Try rebuilding Apache and mod_perl from scratch, and make sure you do not strip symbols out of either.
On some systems/linker you need to tell the linker explicitly to
export such symbols. For example FreeBSD linker needs the
-export-dynamic option.
If you don't succeed with this approach, try statically linking Embperl to Apache/mod_perl (please see the next question for step-by-step instructions on how to do this).
#STATIC_EXTS = Apache Apache::Constants HTML::Embperl
perl Makefile.PL
make clean
perl Makefule.PL
make
(to compile in mod_perl support)
make
Now you have successfully built a httpd with statically-linked Embperl.
NOTE: If you want to stop here, you can skip to step 11. and run a 'make install' in the Embperl directory to finish.
But if you want to run Embperl tests and/or if you want to be able to use Embperl in offline or ``vanilla'' CGI mode, we need to continue:
make clean
perl Makefile.PL
make
NOTE: You should do it in this order, or it may not work.
NOTE: It seems to be necessary to load Embperl at server startup, either by PerlModule or in a PerlScript. See next question on how to do this.
You can load Embperl at server startup by PerlModule or in a startup.pl:
PerlModule HTML::Embperl
use HTML::Embperl
NOTE 1: Either of these approaches can often 'fix' SIGSEVs in any mod_perl handler, not just Embperl.
NOTE 2: When mod_perl is compiled as loadable module (i.e. with USE_DSO) you must not load Embperl at server startup time!
The eaiest way is
make install -> if Embperl is installed, it's easier
gdb perl -> start the debugger with perl binary
set args test.pl -> set the arguments for perl
r -> start the program
-> Here you should receive the signal
share -> makes sure all symbols are really loaded
bt -> show the backtrace
To get some more information it would be a good idea to compile Embperl with debugging infomation enabled. Therefor do
now start the gdb as decribed before.
This may occur when the filesize limit for the account, either test is running as or the test httpd, is too small. Embperl make test generates a really large logfile! Yu must increase the filesize limit for that accounts.
>From Red Plait
My OS is SCO Unix 3.2v4.2, Apache 1.3.4, perl 5.004_4, mod_perl 1.18 and Embperl-1.1.1
I done following:
PerlModule HTML::Embperl <Directory /my_dir> SetHandler perl-script PerlHandler HTML::Embperl::handler </Directory>
You need at least mod_perl 1.22. For mod_perl 1.22 and higher Embperl
should compile out of the box on AIX. If you run into problems with
undefined symbols (like ap_*) make sure you have the newest
mod_perl version (as of this writing this is mod_perl 1.24_01).
The apache server is started as root, then set the effective uid to user ``www'', who can then write to the embperl logfile (owned by root) file handle that is passed along. However, if this log file handle is later accidentally closed, then reopen, the www user would have problem writing to it?
The reopen is only done when the logfile name changes. As log as you don't change the name on the logfile, the logfile will stay open.
The problem (in this case) is, that Embperl init function ,(Init in epmain.c) calls OpenLog will an second argument of zero. Which will only save the filename. The log will actually opened on the first write to it (or at the start of the first request). At this time your Apache has alreay switch to user www. This is done to allow to change the logfile name before an request, but after the init is already called (which is done when you or Apache ``use'' the module)
The current solutions is to write something to the log, before Apache changes it's user (i.e. in the startup.pl)
Like any other Perl module it can. Read ``perldoc ExtUtils::MakeMaker'', to see which parameters are needed for Makefile.PL to change the installation directory. Additionally, you have to change the @INC path to contain your private directory and possibly paths to other object files.
Here are the brief details:
Requirements:
Direction:
Replace /to/your/private/dir with the path to the directory you want the module to be placed in. Now preface your CGI scripts with something like this:
[Alternative 1]
#!/usr/bin/perl -wT
use CGI::Carp qw( fatalsToBrowser ); #recommend using this to report errors on die or warn to browser
use lib '/to/your/private/dir/lib'; #for FILE::Spec
use lib '/to/your/private/dir/'; #to find Embperl
use lib '/to/your/private/dir/i386-linux/auto/HTML/Embperl'; #to find Embperl compiled stuff
#if for some very weird reason the above 'use lib' pragma directive doesn't work, see Alternative 2
use HTML::Embperl;
#your code below ...
[Alternative 2]
#!/usr/bin/perl -wT
use CGI::Carp qw( fatalsToBrowser ); #recommend using this to report errors on die or warn to browser
BEGIN {
unshift @INC, '/to/your/private/dir/lib'; #for FILE::Spec
unshift @INC, '/to/your/private/dir/'; #to find Embperl
unshift @INC, '/to/your/private/dir/i386-linux/auto/HTML/Embperl'; #to find Embperl compiled stuff
}
use HTML::Embperl;
#your code below ...
When you make test, you may encounter superfluous warnings, you may want to change the test.pl that ships with EmbPerl from
BEGIN
{
$fatal = 1 ;
to
BEGIN
{
unshift @INC, '/to/your/private/dir/lib';
$fatal = 1 ;
...
because the test.pl may not be able to find FILE::Spec if you have it installed on a private directory for Perl 5.004_04.
Do something similar to the important file embpcgi.pl as you do for all your CGI scripts, like modifying the @INC as shown above, to allow perl to find in particular the EmbPerl shared obj files...
And when you invoke your CGI scripts like so,
http://www.yourdomain.com/cgi-bin/embpcgi.pl/templateFiles/myNifty.epl
the script should work.
The most common problems of all involve Escaping and Unescaping. They are so common, that an entire section on Escaping & Unescaping is devoted to them.
Nothing weird here. Everything is well defined. Just let us try to understand how Perl, mod_perl and Embperl works together:
"perldoc -f use" tells us:
Imports some semantics into the current package from the named module, generally by aliasing certain subroutine or variable names into your package. It is exactly equivalent to
BEGIN { require Module; import Module LIST; }
except that Module must be a bareword.
So what's important here for us is, that use executes a require and
this is always done before any other code is executed.
"perldoc -f require" says (among other things):
..., demands that a library file be included if it hasn't already been included.
and
Note that the file will not be included twice under the same specified name.
So now we know (or should know) that mod_perl starts the Perl interpreter
once when Apache is started and the Perl interpreter is only terminated
when Apache is terminated. Out of these two things follows, that a module
that is loaded via use or require is only loaded once and will never
be reloaded, regardless if the source changes or not.
So far this is just standard Perl. Things get's a little bit more difficult when running under mod_perl (only Unix), because Apache forks a set of child processes as neccessary and from the moment they are forked, they run on their own and don't know of each other. So if a module is loaded at server startup time (before the fork), it is loaded in all childs (this can be used to save memory, because the code will actually only reside once in memory), but when the modul is loaded inside the child and the source changes, it could be happen, that one child has loaded an ealier version and another child has loaded a later version of that module, depending on the time the module is actualy loaded by the child.
That explains, why sometimes it works and sometimes it doesn't, simply because different childs has loaded different versions of the same module and when you reload your page you hit different childs of Apache!
Now there is one point that is special to Embperl to add.
Since Embperl compiles every page in a different namespace,
a module that doesn't contains a package foo statement is compiled in the
namespace of the page where it is first loaded.
Because Perl will not load the module a second time,
every other page will not see subs and vars that are defined in the loaded
module. This could be simply avoided by giving every module that should be
loaded via use/require an explicit namespace via the package statement.
So what can we do?
do instead of require. do will execute your file everytime
it is used. This also adds overhead, but this may be accpetable for small files
or in a debugging environement. (NOTE: Be sure to check $@ after a do,
because do works like eval)
[+ $var . "<b>". $foo . "</b>". $bar +]
See what we mean? This is an Escaping & Unescaping problem for sure. You need to escape <b> as ' <b> ' and you probably also need to read the section on Escaping & Unescaping...
This might be a problem with Escaping & Unescaping as well.
Sounds like a problem with Escaping & Unescaping again!
Unless, of course, you have already read the section on Escaping & Unescaping, and it is still happening... Like if you are using optRawInput and your HTML is _still_ being stripped out...
Aha! Well that's different! Never mind..
It can be easy to accidentally set optRawInput too late in your code...
Try setting it in an extra Perl block ( [- $optRawInput = 1 -] ) earlier in the code, or in the server config, and see if that doesn't solve the problem... (optRawInput must be set before the block that uses it begins, as the block which uses it shouldn't be translated).
If Embperl is not compiled at server startup, it can cause error messages, SEGfaults, core dumps, buffer overflow, etc - especially if you are using another module inside an Embperl page. As far as anyone can tell, this seems to be a Perl/mod_perl problem - but maybe not. If you have any ideas, let me know.
To see the steps for loading Embperl at server startup, please see the section Downloading, Compiling & Installing.
NOTE: When mod_perl is compiled with USE_DSO it behaves vice versa and you may get SIGSEGVs when Embper is loaded at server startup time.
This is a known problem, but it is a problem with mod_perl rather than with Embperl. It looks like mod_perl clears the request_rec after the first subrequest, so that it later doesn't know which subrequest was intended (unless it's explicitly specified). Try using:
Apache::Include->virtual("test.epl", $r);
(instead of just Apache::Include->virtual(``test.epl''); where $r is the apache request rec)
You don't need PerlSendHeader when using Embperl - Embperl always sends its own httpd header.
You'll find the answer to this and many other header issues in the Common Questions section.
That isn't surprising, as you cannot split Perl statements across multiple [- -] blocks in Embperl :) You need to use a metacommand for that. The [$while$] metacommand comes to mind... :)
For a list of all possible metacommands, see the section on Meta-Commands in the Embperl documentation.
[$ while $st -> fetch $]
#some html or other Embperl blocks goes here
[$ endwhile $]
Newer Embperl versions (1.2b3 and above) supports the [* *] which can be used for such purposes.
[* while ($st -> fetch) { *]
#some html or other Embperl blocks goes here
[* } *]
While the later can use all Perl control structures, the first seems to me more readable and is better debugable, because Embperl controls the execution of the control structure it can do a quite better job in debug logging.
Hey! Not you again!? I thought we already sent you to the Escaping & Unescaping section of the FAQ?!?! ;)
If you have something like this in your source, it may be the problem:
<META HTTP-EQUIV="content-type" CONTENT="text/html;charset=iso-8859-1">
Netscape seems to have a problem in such cases, because the http header is only content-type text/html, while the META HTTP-EQUIV has an additional charset specified. If you turn optEarlyHttpHeader off, Embperl will automatically set the http header to be the same as the META HTTP-EQUIV.
The problem often occurs, when you have a <table> tag in one file and a </table> tag in another file and you both include them in a main page (e.g. as header and footer). There are two workarounds for this problem:
[- $optDisableTableScan = 1 -]
If you put this at the top of your header/footer which you include with Execute, then the main page will still process dynamic tables.
<!-- <table><tr><td> -->
This will work also, because Embperl (1.x) will not scan for html comments
The most common questions of all deal with Escaping & Unescaping - they are so common that the whole next section is devoted to them. Less common questions are addressed here:
Embperl cannot covert your HTML into one piece of Perl-code, but you can wrap the call to Execute into a Perl function and let AUTOLOAD call it.
You can write it as
<meta http-equiv="Content-Type" content="text/html">
(Embperl will automatically insert all meta http-equiv tags into the http header)
or use %http_headers_out
[- $http_headers_out{'Content-Type'} = 'text/html' -]
or (only when running under mod_perl) you can use
[- $req_rec -> content_type ('text/html') -]
Yes. Embperl sends its own headers, so all you have to do to send cookies is to remember to print an additional header.
Example Code:
<META HTTP-EQUIV="Set-Cookie" CONTENT="[+ $cookie +] = [+ $value +]">
[- $http_headers_out{'Set-Cookie'} = "$cookie=$value" -]
[- $req_rec -> header_out("Set-Cookie" => "$cookie=$value"); -]
NOTE: You make also take a look at Embperls (1.2b2 and above) ability to handle sessions for you inside the %udat and %mdat hashes.
The following way works with mod_perl and as cgi:
[- $http_headers_out{'Location'} = "http://www.ecos.de/embperl/"; -]
the status of the request will automaticly set to 301.
or use the mod_perl function Apache::header_out.
Example Code:
[-
use Apache;
use Apache::Constants qw(REDIRECT);
$req_rec->header_out("Location" => "http://$ENV{HTTP_HOST}/specials/");
$req_rec->status(REDIRECT);
-]
If there is nothing more to do on this page, you may call exit directly
after setting the status.
As always, there is more than one way to do this - especially as this is more of a question of how you are coding your HTML than how you are coding your Embperl.
Here are some ideas:
If you think of another way, or come up with some sample code, I'd love to hear from you, so that I could add it to the FAQ...
Yes. Your page design staff should just be able to say <input name=``foo''> and let the default attributes of ``foo'' be defined elsewhere - for instance in a settings file. In this case, %fdat should be pre-set with your default values. Setting $fdat{foo} = ``abc'' will cause Embperl to change the above code to <input name=``foo'' value=``abc''>.
The [$hidden$] metacommand creates hidden fields for every entry in %fdat which was not used by any other input tag so far.
You can also try something like this:
[-
$fdat{foo} = "abc" ;
$fdat{bar} = "xyz" ;
-]
<input name="foo">
[$hidden$]
and Embperl will create:
<input name="foo" value="abc">
<input type=hidden name="bar" value="xyz">
For a list of all possible metacommands, see the section on Meta-Commands in the Embperl documentation.
Just like anything else, Embperl is as secure as you make it. Embperl incorporates Safe.pm, which will make it impossible to accidentally access other Packages - it also permits the Administrator to disable Perl opcodes, etc.
For more on security, please see Embperl/``(Safe-)Namespaces and opcode restrictions'' in the Embperl documentation.
Embperl is going to be an Object from version 1.2b1. This, among other things, make it re-entrant, so that you will be able to call Execute from within an Embperl page. It will also mean that Embperl will come with hooks, which will allow you to alter or change the way Embperl processes code. The details have not all been worked out yet, but I'm working on it... :)
All embedded Perl code is compiled the first time it is executed and cached for later use. The second time the code is executed, only the precompiled p-code is called.
Every code block is compiled as a single subroutine. The HTML text between the Perl block is still read from the file.
With Embperl 1.0 and higher, you can do this. QUERY_STRING is set as $ENV{QUERY_STRING} by default. Alternatively, you can use the fdat parameter to pass values to %fdat.
I am using embedded Perl on my site and am curious if I can use it for server side includes. I want to embed the contents of file x.html into file y.html such that whenever I change x.html, displaying y.html will also reflect this change. How do I do it using embedded perl?
You need Embperl 1.2b4 or above. Then you can say inside of y.html:
[- Execute ('x.html') -]
I have a rather large table in a database which I'd like to display using EmbPerl. All of the examples show a process of fetching all the data first, then iterating through it using $row and $col, like this:
[-
$sth = $dbh -> prepare ("select * from $comptbl order by SubSystem");
$sth -> execute;
$dref = $sth -> fetchall_arrayref;
-]
<TABLE>
... $dref -> [$row][0] ...
</TABLE>
I'd prefer to fetch the data one row at a time, how can I do this?
For solution 1 you may write
<table>
[$while $rref = $sth -> fetch $]
<tr>....</tr>
[$endwhile$]
</table>
Solution 2 should work like this
<table>
<tr> [- $dummy = $row ; $rref = $sth -> fetch -]
....
</tr>
</table>
The table ends when the expression where $row is used in some way returns <undef>. So also there is no releation between $row and the fetch, both conditions are met.
I'm doing a search on a table where some of the columns have NULL and non-NULL values. DBIx::Recordset has no problem reading this values The problem is that I then tried to print these values out in a table using Embperl's table feature, like this.
<TABLE>
<TR>
<TD>$set[$row]{column_name1}</TD>
<TD>$set[$row]{column_nameN}</TD>
</TR>
The problem is that I got 5 rows instead of the 15 that I was expected. I have been trying all kinds of tweaks to the arguments to the Search function and getting nowwhere, until I re-read the Embperl docs. Embperl will not print out a table row if one of the columns has an expression that is undefined. This is a problem since DBIx::Recordset (and DBI) natually uses undef to represent a NULL value for a column. So I made a slight modification to my embperl code.
<TABLE>
<TR>
<TD>defined($set[$row]{column_name1}) ? $set[$row]{column_name1} :
"UNDEF"</TD>
. . .
<TD>$set[$row]{column_nameN} ? $set[$row]{column_nameN} : "UNDEF"</TD>
</TR>
Now all 15 rows appear as expected, with "UNDEF" representing the NULL values in the database.
Another way top solve you problem may be:
<TABLE>
<TR>
[- $r = $set[$row] -]
<TD> [+ $r -> {column_name1} +] </TD>
. . .
<TD> [+ $r -> {column_nameN} +] </TD>
</TR>
This will only refer one time to $row and the expression is defined, as long as the row could be fetched from the db. All NULL fields will be displayed as empty table cells.
By default, Embperl removes all HTML tags from the Perl source. It does this because many high-end WYSIWYG HTML Editors (like MS Front Page) insert HTML tags like <FONT> and <COLOR> in rather random places (like in the middle of your Perl code). This Embperl feature keeps things like
[- $var = 1; <br>
$foo = 2 -]
permissable, so that you can enter Perl code while you mark up pages in an editor, all at once. In this example, Embperl would remove the unnecessary <br> tag and, therefore, make Perl happy. And if Perl is happy, we are all happy.
It is not difficult to change this behavior, if you are the kind of person who codes HTML in an ascii editor (like vi or emacs).
If you use a high-level HTML editor, you shouldn't have any problems with input escaping, because the editor will, for example, write a '<' as '<' in the HTML code. Embperl translates this back to '<' and therefore it knows that this wasn't an HTML tag which should be removed.
Problems with input escaping only occur if you use an ascii editor. Then you will need to escape input (see the next section for details on how to do this).
To see the exact steps taken by Embperl to process a Perl-laden document, please see the section Inside Embperl in the Embperl documentation.
Example: In most cases '\<tr>' but inside double-quotes ``\\<tr>''
Here is one example of how to do it:
[- $output = "<bold>Hello world</bold>" -]
[+ $output +]
write
[- $output = "Hello world<bold>" -]
this outputs
Hello world
or
<bold>[+ $output +]</bold>
this outputs
<bold>Hello world</bold>
And here is another example of how to do it:
[-
@a = ('a', 'b', 'c') ;
foreach $i (0..2)
{
$output. = "<tr><td>Row $a[$i]</td></tr>" ;
}
-]
<table>
[+ $output +]
</table>
The output here would be:
<table>Row aRow bRow c</table>
The Embperl version is
[-
@a = ('a', 'b', 'c') ;
-]
<table>
<tr><td>Row [+ $a[$row] +]</td></tr>" ;
</table>
The output will be
<table>
<tr><td>Row a</td></tr>" ;
<tr><td>Row b</td></tr>" ;
<tr><td>Row c</td></tr>" ;
</table>
And another: This elegant solution shows you how to take advantage of Embperl's ability to create dynamic tables:
[-
use DBI;
my $dbh =
DBI->connect("DBI:mysql:database:localhost","Username","Password") ||
die($!);
$hstmt = $dbh->prepare("select ID, Heading from Shops order by Heading");
$hstmt->execute();
$dat = $hstmt->fetchall_arrayref() ;
$hstmt->finish();
$dbh->disconnect();
-]
<table border=1>
<tr><td>[+ $$dat[$row][$col] +]</td></tr>
</table>
This HTML code will then display the contents of the whole array.
Embperl will also escape the output - so <H1> will be translated to <H1>
To see the exact steps taken by Embperl to process a Perl-laden document, please see Inside Embperl in the Embperl documentation.
(You need a double backslash \\, because
the first one is removed by Perl and the second by Embperl.
Have you, umm, checked the error log? ;)
Have you tried setting debug flags higher by resetting EMBPERL_DEBUG in the server config files? (And still higher? :)
dbgMem isn't usually very useful as it always outputs a lot of allocation. dbgFlushLog and dbgFlushOutput should be used if (and only if) you are debugging SIGSEGVs.
For easy debugging, you can tell Embperl to display a link at the top of each page to your log file. Then every error displayed in an error page is a link to the corresponding position in the logfile, so you can easily find the place where something is going wrong
For more on using HTML links to the Embperl error log, see Embperl/``EMBPERL_DEBUG'' in the Embperldocs.
There are some debugging settings which may cause Embperl to drastically slow down. If you are done with debugging, set debugging bits back to normal.
Also, using dbgFlushLog and dbgFlushOutput will make execution much slower. These are only intended for debugging SIGSEGVs.
Never set all debugging bits!
Usually, defaults are set in a way that is likely to make most sense for a majority of users. As of version 1.0, Embperl allows much more flexibility in tweaking your own default values than before. Take a look at EMBERPL_OPTIONS.
[+ $optDisableHtmlScan = 1 +]
<table> foo </table>
[+ $optDisableHtmlScan = 0 +]
Set optDisableTableScan in EMBPERL_OPTIONS
$HTML::Embperl::escmode = 0 ;
Predefined values in Embperl are simply aliases for $HTML::Embperl::foo (for instance, $escmode is an alias for $HTML::Embperl::escmode)
You'll find the answer to this and many other header issues in the Common Questions section.
This is caused by the translation of characters to HTML escapes. Embperl translates them to escapes which are then sometimes not understood by the browser, which may display a ``?'' instead, because it is using the wrong character set.
If you want to use the escaping features of Embperl in this case, you have
to adapt the file epchar.c to your character set.
The distribution contain already an epchar.c.iso-latin-2 from Jiri Novak which
is an replacement for epchar.c for the iso-8859-2 (iso-latin-2) character set.
If you want to use iso-latin-2, simply renmae epchar.c.iso-latin-2 to epchar.c.
There is also an file epchar.c.min from Sangmook Yi, which leaves all
chars above 128 untouch, which is especialy usefull for two byte charsets.
This file contains three tables:
Char2Html [] Convert characters to html escape
Char2Url [] Convert characters to url escapes (do not change this one!!)
Html2Char [] Convert html escapes to characters
You need to change the first and the last tables. Do not change the second table!!
Please make sure Char2Html contains one entry (and only one entry) for each of the 256 ascii codes (with none left undefined) in the right order, and that Html2Char is sorted by html escape.
If somebody generates new tables for national character sets, please send a copy to the author, so it can be included it in future versions of Embperl.
As long as your input file's time stamp stays the same, Embperl will only compile the script the first time it's called. When you use the Execute function, Embperl will recompile the script only if the input file and mtime paramenters have changed since the last time the script was called.
You can verfiy this by setting dbgDefEval. Now, every time a Perl block is compiled, Embperl logs a line starting with DEF:. You will see this line only on the first request. The cached Perl blocks are stored as a set of subroutines in the namespace of the document. (HTML::Embperl::DOC::_<n> is the default) Look at the logfile to see the actual name.
To pre-compile pages, just call Execute once for every file at server startup in your startup.pl file.
The cached Perl blocks are stored as a set of subroutines in the namespace of the document. (HTML::Embperl::DOC::_<n> for default) Look at the logfile to see the actual name.
Embperl only creates a CGI objects to process multipart form data (from fileupload). In all other cases Embperl doesn't use CGI.pm. There is no way to change this behaviour, or access the internal CGI object in case of file-uploads.
You can get free support on the mod_perl mailing list. If you need commercial support (with a guarantee for response time or a solution) for Embperl, or if you want a web site where you can run your Embperl/mod_perl scripts without setting up your own web server, please send email to info@ecos.de.
Please also see the section Embperl/``Support'' in the Embperl documentation.
some links here
Gerald Richter <richter@ecos.de>
Edited by Nora Mikes <nora@radio.cz>